How to install Surf-Zone Thigh Straps (TG1000101PAR) on your Pyranha SurfJet 2.0:
Tools Required: 5mm Allen Key
Optional: You may wish to add a small amount of Threadlock to each bolt to prevent them coming loose during usage and transport.
Step 1: Identify the left and right thigh straps; the pre-threaded, single D-ring should be towards the bow of the kayak, and the pad should curve inwards towards the centreline of the kayak.
Step 2: Take the left hand side thigh strap and place a bolt through the hole in the single D-ring before screwing this into the threaded brass insert located in the left hand footrest area of the kayak.
Note: If you already have the Surf-Zone Backrest Kit installed, skip to Step 4.
Step 3: Insert a bolt through a double D-ring, and screw into the threaded brass insert located to the left of the kayak’s seating area.
Step 4: Unwrap the strap from around the thigh pad and thread the loose end through the forward ring of the double D-ring installed on the left of the kayak’s seating area. Double the strap back on itself, threading through the empty, stitched loop closest to the paddler on the thigh pad and continuing through the central stitched loop before threading upwards through both turquoise anodised buckles, and back down through the largest buckle only.
Step 5: Repeat for the right hand thigh strap, then sit on the kayak and adjust the straps so they hook over your knees snugly, but not so much as to hinder safe exit from the kayak. DO NOT put your legs through the straps under any circumstances.
Forums
SUPzero Forums
Market
- Small Pyranha Loki for sale » Hi Charles, Unfortunately this post is over 4 years old so I would imagine the boat has been sold... (FS - North America - US)
- Necky Blunt for sale » Is your boat still For sale... (FS - Africa)
- WTB Jackson Funrunner 60 » Looking for a Funrunner 60... (FS - North America - US)
[please login to make this ad block disappear]
SurfJet 2.0 Fitting Guide: Surf-Zone Thigh Straps
39 views
Uploaded by:
LizF@Pyranha
•
Category:
Whitewater
•
Added on:
14 June 2021
Description
How to install Surf-Zone Thigh Straps (TG1000101PAR) on your Pyranha SurfJet 2.0:
Tools Required: 5mm Allen Key
Optional: You may wish to add a small amount of Threadlock to each bolt to prevent them coming loose during usage and transport.
Step 1: Identify the left and right thigh straps; the...
Tools Required: 5mm Allen Key
Optional: You may wish to add a small amount of Threadlock to each bolt to prevent them coming loose during usage and transport.
Step 1: Identify the left and right thigh straps; the...
See the AUP for our Acceptable Use Policy and a Privacy Statement. Verein Playak is responsible for all editorial content on this site (including all graphics). No part of this site may be duplicated in any way without explicit permission from Verein Playak. Verein Playak takes great care to only publish original content, but since part of the content is user generated, we cannot always guarantee this 100%. If you notice any copyright violations, please let the editors know through the contact form and they will take appropriate action immediately. As a news and information platform, we republish small text snippets and thumbnail images, but always link to original content on other sites, and thus aim to adhere to a 'Fair Use' policy. If you believe we violate this policy in any particular case, please contact us directly and we'll take appropriate action immediately.